1.
Concrete gains strength due to
2.
Diagonal tension in a beam
3.
Pick up the incorrect statement from the following:
4.
To determine the modulus of rupture, the size of test specimen used is
5.
) According to IS: 4561978, the column or the strut is the member whose effective length is greater than
6.
Pick up the correct statement from the following:
7.
The main factor to be considered while preparing a detailed estimate, is
8.
Pick up the correct statement from the following:
9.
Pick up the correct statement regarding the centre line method of estimating a building
10.
Pick up the correct statement from the following:
11.
Systematic errors are those errors
12.
If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as
13.
The least count of a vernier scale is
14.
On a diagonal scale, it is possible to read up to
15.
In case of a direct vernier scale
16.
Short offsets are measured with
17.
Greater accuracy in linear measurements, is obtained by
18.
For highways, tunnelling is preferred to if the open cut exceeds :
19.
In case of railways,
20.
Water formed transported soil is
21.
'Talus' is the soil transported by
22.
'Loess' is silty-clay formed by the action of
23.
'Drift' is the material picked up, mixed, disintegrated, transported and redeposited by
24.
Both architect and engineer make use of the cost estimate of the project:
25.
Pick up the correct statement from the following:
26.
The more critical (or severe) test of the firm’s liquidity can be judged by:
27.
The most suitable tool to draw freehand is
28.
Building working drawings are generally prepared in drawing paper of
29.
The freehand sketch is normally used for
30.
One method of preparing perspective view of an object is:
31.
It is important to have a good .............. to be successful in your career.
32.
Quality control during the construction consists largely of ensuring
33.
Ethics & Law overlap. This is called…
34.
Construction team means
35.
The main principle of an organization, is
36.
Henry Gantt developed Bar charts for planning and scheduling of projects in
37.
An Executive Engineer may have powers up to
38.
CPM is
39.
Pick up the PERT event from the following:
40.
The important test to be conducted on a stone used in docks and harbors is
41.
The predominant constituent which is responsible for strength in granite is
42.
Granite is not suitable for ordinary building purpose because
43.
The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as
44.
Crushing strength of a good building stone should be more than
45.
The radial splits which are wider on the outside of the log and narrower towards the pith are known as
46.
Euler's formula is applicable for which type of columns?
47.
For an isotropic, homogeneous and elastic material obeying Hook's law, number of independent elastic constants is
48.
If a body is stressed within its elastic limit, the lateral strain bears a constant ratio to the linear strain. This constant is known as:
49.
Partition wall is designed to carry
50.
A plane section section before twisting remain plane after twisting, if the cross-section is
This quiz has been created using the tool HTML Quiz Generator
Tags
exams